Tires/Tubes

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. This is enough sealant for one tire.

- Shim adds support to presta stem used in a schrader rim

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher quality tube will always last longer than a cheap tube during comparable everyday use.

Q-Tubes Value Series Presta tubes: Price point tubes with 1.0mm wall thickness, removeable valve cores and simplified size specifications Removable Presta valve core Individually packaged tubes in recycled cardboard Labeled Size: 700 x 18-25cm Weight: 125 g Valve Core: Removable Shaft Type: Threaded ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm , 24 mm , 25 mm Tube Compound: Butyl ISO Diameter: 622 / Road / 29" Valve: Presta Wall Thickess: 1 mm

The crowning touch for any cruiser wheel. - Decorative valve covers screw onto valve stem - Designed for standard Schrader valves only - Set of two, one for each wheel

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

Q-Tubes Value Series Presta tubes: Price point tubes with 1.0mm wall thickness, removeable valve cores and simplified size specifications Removable Presta valve core Individually packaged tubes in recycled cardboard Labeled Size: 26 x 1.75-2.125 Weight: 185 g Valve Core: Removable Shaft Type: Threaded ISO Width (mm): 47 mm , 48 mm , 49 mm , 50 mm , 51 mm , 52 mm , 53 mm , 54 mm , 55 mm , 56 mm , 57 mm Tube Compound: Butyl ISO Diameter: 559 / 26" MTN Valve: Presta Med 41-55mm Wall Thickess: 1 mm

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

WeThePeople innertubes are made of high-quality rubber and work very well to keep air in your tires. Designed for today's wider tires, they keep you rolling smoothly in all conditions. These are for 22-inch tires.

Unless you're running tubeless (and even if you are), it's a good idea to keep a spare tube or two around, so you can change a tire quickly and reliably, then get back to riding. Continental's Presta valve tube has you covered.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

Keep rolling with Avenir's Schrader Valve Tubes. They're built for durability and all Avenir tubes are inflated for 24 hours to ensure you get the perfect tube, every time.

Keep on rolling with Avenir's Threaded Presta Valve Tubes. They're built for durability, and all Avenir tubes are inflated for 24 hours to ensure you get the perfect tube, every time.

Continental bicycle tubes are made of seamless butyl rubber and are individually tested for top quality.

These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061

• Low Lead Valve • ISO Diameter: 203 / 12.5 • ISO Width (mm): 57 mm • Labeled Size: 12 x 2-1/4 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth

• Low Lead Valve • ISO Diameter: 340 , 349 / 16" recumbent • ISO Width (mm): 35 mm • Labeled Size: 16 x 1-3/8 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight (g): 86 g

• Low Lead Valve • ISO Diameter: 305 / 16" BMX • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

• Low Lead Valve • ISO Diameter: 355 • ISO Width (mm): 44 mm , 45 mm , 46 mm , 47 mm , 48 mm , 49 mm , 50 mm , 51 mm , 52 mm , 53 mm , 54 mm • Labeled Size: 18 x 1.75-2.125 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight (g): 118 g

• Low Lead Valve • ISO Diameter: 451/ 20 x 1-1/8", 20 x 1-1/8" • ISO Width (mm): 28 mm , 29 mm , 30 mm , 31 mm , 32 mm , 33 mm , 34 mm • Labeled Size: 20 x 1-1/8 - 1-3/8 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 94g

• Low Lead Valve • ISO Diameter: 406 / 20" BMX • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 98g (1.25-1.5), 114g (1.5-1.75), 130g (1.75-2.125), 152g (2.1-2.3)

• Low Lead Valve • ISO Diameter: 457 • ISO Width (mm): 44 mm • Labeled Size: 22 x 1.75 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 145 g

• Low Lead Valve • ISO Diameter: 540 / wheelchair • ISO Width (mm): 28 mm • Labeled Size: 24 x 1-1/8 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 94 g

• Low Lead Valve • ISO Diameter: 540 / wheelchair • ISO Width (mm): 35 mm • Labeled Size: 24 x 1-3/8 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 124g