$24.99 $49.99 50% Savings
45NRTH's Jaztronaut are temperature-blocking insoles designed for cycling footwear. These insoles are constructed with a 2mm panel of non-compressible aerogel insulation laminated inside durable EVA foam. Aerogel is a porous nanotechnology that has been used by NASA to insulate astronaut spacesuits! It has super-high thermal performance and does not require loft to trap heat. Simply put, these insoles say no to cold cleats, and yes to warm feet, even under pedal load.
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
Optimal insulation and wind protection for those cold weather rides. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos
Cold feet and soggy socks are things of the past with Bellwether's Aqua-No Booties. Their Aqua-No fabric and seam-sealed construction shuts out precipitation while letting air flow freely. They feature zip closures for easy on and off as well as reflective trim for enhanced visibility. Plus, cleat cutouts and reinforced heels and toes provide durability. Features: - Waterproof and breathable - Seam-sealed construction - Reinforced heel and toe - Fits any cleats - Reflective accents and logos - Zippered closure
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
- Compatible with Look Delta System - Engineering thermoplastic injection body - Weight of 24 grams per cleat - 9-degree arc
Giro's Ambient Toe Covers add just the right amount of extra warmth on cool rides. Wind- and water-resistant neoprene covers are lined with AGrid fleece for warmth and protection from the elements. Reinforced toe guards add durability and reflective accents enhance visibility.
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
Replacement studs for Louis Garneau MTB and cyclocross shoes. Contains four 8mm-tall studs and a stud remover tool.
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
Protect your feet from the elements with the Thermax II. This shoe cover provides high insulation from the cold and is very water resistant. The Thermax II offers maximum visibility thanks to reflective accents located at the front, rear and side. DETAILS: - Fabric: All seam-sealed 3 mm super stretch neoprene laminated with fleece - Under sole: Under opening with Velcro for easy adjustment and reinforced rubber for durability - Side opening: Side Velcro with safety puller for easy slip-on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
Fact: If your feet are happy, you ride longer. Pearl's F.I.T. Insole System is an ingenious, independent left- and right-foot adjustment system that optimizes pedaling efficiency, fit, support, endurance and comfort. This fully customizable, cycling-specific system dials in arch support and Varus alignment for biomechanical knee alignment and forefoot support. Three different arch options and three Varus inserts let you customize each foot perfectly, and the molded heels lessen lift for maximum power transfer. The F.I.T. insoles are meant to replace your current insoles, so the stack height and your fit does not change. One ride with the F.I.T. Insoles and you'll see what true comfort means.
Pearl Izumi's P.R.O. Barrier WxB MTB Shoecover offers mountain-bike-specific features to keep even the wildest winter trail rides comfy and dry. The seam-taped P.R.O. Barrier WxB fabric exterior repels wind and water, while a fleecy interior ensures warmth. All-over stretch and a two-stage hook-and-loop closure allow a custom fit with zero slop, toe bumpers gives added protection, and the Kevlar bottom is designed to accommodate MTB shoe lugs while providing bomb-proof strength. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece-lined interior for warmth - Waterproof, taped external seam - Second Generation Two stage hook-and-loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Reflective elements for low–light visibility
Keep your toes toasty in harsh conditions with Pearl Izumi's Elite Softshell MTB Shoe Covers. Their 3-layer wind and waterproof Softshell fabric makes these booties extremely warm. Plus, these fine covers have tall cuffs to seal out the elements, reflective accents for visibility, Kevlar bottoms that fit treaded mountain bike shoes, and 2-stage hook-and-loop closures for easy on/off.
Keep your toes toasty in harsh conditions with Pearl Izumi's Elite Softshell Shoe Covers. Their 3-layer wind- and waterproof Softshell fabric makes these booties extremely warm. Plus, these fine covers have tall cuffs to seal out the elements, reflective accents for visibility, cleat cutouts in the durable Kevlar bottoms and 2-stage hook-and-loop closures for easy on/off.
Page 1 of 2 Next page