The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.
- The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
Strong and sturdy front rack to haul the occasional luggage in the streets or to support randonneur bags while touring. MATERIAL - ALUMINUM DIMENSIONS - 246 x 332 mm STRUT LENGTH - 240 mm MOUNTING STYLE - FORK CROWN / MID-BLADE FORK MOUNTS EXTRA INFO - MAX. LOAD 8 Kg WEIGHT - 654 g
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs
This one-size-fits-all aluminum tubular rear rack is designed exclusively for Fat Bikes with disc brakes. The rack legs are adjustable to fit most 24” & 26” wheel Fat Bikes. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. Not compatible with asymmetric rearstay design fat bike frames.
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
$99.99 $139.99 29% Off
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs
Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty
- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg
Make life easier and your bike cooler MIK stands for Mounting Is Key, and this rad rear rack comes equipped with this functionality. Because easy is the name of the game. Easy on. Easy off. Rack it. Stack it. Pack it. - Compatible with MIK accessories - Alloy 12mm diameter bars - Carrying capacity up to 27kg or 60lbs - Stainless steel hardware included - Rear rack designed to be compatible with all Electra 26", 27.5" and 700c wheels - Compatible with approved child seats
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
The magic is in the mounting. MIK stands for Mounting is Key, and this rad rear rack comes equipped with this functionality. Because easy is the name of the game. Easy on, easy off. Carry your cargo in style. - MIK-compatible - Carrying capacity up to 25kg or 55lbs - Stainless steel hardware included - Rear rack designed to be compatible with most Electra 24" wheel models - Material: Aluminum
Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.
This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.
- High-quality alloy tubing material and stainless hardware - Adjustable width to fit Plus and Fat bike tires up to 4'' - Adjustable height for 26'' / 27.5'' / 29'' wheels - Compatible with most disc brake systems - Powder coat finish for durability - Heavy-duty construction for year-round use - 27kg (59lb) maximum recommended load - Weight: 765g
Features - E-Bike Specific Rack utilizing Giant's Proprietary Smart Mount System - The usage of a fender bracket (Rack-It Metro E - Fender Bracket) is required when installing this rack Fits: - Quick-E + (2016+) - Road-E + (2016+) [Does not fit Road-E + Pro] - Dirt-E + (2016+) [Does not fit Dirt-E + Pro]
Page 1 of 3 Next page