- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Give your road bike a stiff upper lip with Salsa's Moto Ace S.U.L. Stem. This masterpiece boasts a forged and welded aluminum construction and Salsa's Stiff Upper Lip technology that utilizes an interlocking groove to remove torsional loads from the clamp bolts.
$99.99 - $109.99
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
$95.00 - $102.99
With its 3D-forged aluminum construction, 4-bolt faceplate and titanium hardware, Giant's Contact OD2 Stem is a great way to add lightweight strength and a custom fit to your ride. The oversize box cross-section gives you stiffness that you can feel when you really torque on the bars. The recessed top cap and semi-integrated upper spacer give you a clean, streamlined look and increase the steerer interface for a super solid front end.
$23.99 - $26.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
$29.99 - $34.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Named after the multiple headed serpent from Greek mythology, the Hydra stem really is a beast of many heads. Available in three rise options and utilizing shark tooth clamping inside the stem body to provide a vice like grip, the Hydra is one stem that won't be letting your bars slip any time soon. - Available in 22.2mm and oversized 25.4mm clamp options - Material: 6061-T6 alloy, fully CNC machined - Wider 48mm faceplate for extra grip Please Note: The 25.4mm Hydra stem is only compatible with 25.4mm bore handlebars, including the 25.4mm WTP BUCK and Mad Max bars.
Based on the classic "Trail style" stems we all used to ride back in the day, the Patrol stem features a smooth, simple shape with a wider faceplate, larger head bolts, and hidden CNC cutouts under the stem to keep the weight down without making the stem look like a block of Swiss cheese. A slightly longer 53mm reach and a recessed topcap for a flush fit with the Patrol forks, make this stem the perfect crown jewel of the Patrol line. - 6061-T6 alloy, full CNC machined - Wider 47.5mm faceplate to prevent bar slip
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height
Based on our famous Crystal stem, the Radio Axis stem is CNC machined out of the highest quality 6061-T6 alloy, lifts your bars nice and high, and prevents them from slipping due to our wider 48mm clamping area and the larger head 6mm bolts. The choice of most of our team, this beauty now comes in a wild Sandblasted Purple finish.
The Device G7 stems feature serrated face plates which increase the holding power by 20%! Key features: - Forged and CNC’d with individual face plates - Flush-mount cap. 250g (8.8oz)
Key features: - Extruded and CNC’d from 6061 aluminum, with a hollow window thru the side for weight reduction - Slimmer profile than the original Proline stems - Laser etched RL logo cap
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Ritchey's WCS C260 stem starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware, and stem body. The steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube. The body is 3D-forged from an advanced 7050 aluminum and internally machined for further weight reduction. Premium quality chromoly steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity. - Stack Height: 42mm - Faceplate width: 36mm - Weight: 103g (100mm)
Pro caliber features at a real-world racer price. This 3D net forged 6061 aluminum stem offers +/- 30 degrees of stem angle for riders wanting a more comfortable fit. The angled steer tube clamp slot reduces stress on carbon steer tubes. - Material: 3D net forged 6061 - Angle: +/-30 degree - Steerer Height: 45mm - Steerer: 1-1/8” - Faceplate Width: 40mm - BB black finish - 170g (110mm)
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
The updated SL-K stem is lighter than ever – just 141g for the 100mm length. Using high-strength 2014-aluminium and sophisticated forging and machining, FSA finely controls the amount of material used to cut weight. - 3D forged and CNC machined AL-2014 - Carbon fiber faceplate - Chromoly hardware
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
Page 1 of 5 Next page