A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
$40.00 - $45.00
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 35.0mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
• Forged aluminum • Single-bolt clamp • 180mm tall
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
$90.00 - $95.00
• 3D forged 2014 aluminum alloy with oversized box cross-section • Oversized 46mm wide 6061 alloy faceplate • Titanium hardware • ± 8° rise requires fewer spacers • 1-1/8" steerer adapter included • Weight: 145 grams (100mm)
$35.99 - $49.99
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
$19.99 - $34.99
Comfort is king when you dial in your riding position with Profile's Boa Threadless Stem. This light and durable welded-aluminum stem features a 20- to 40-degree rise and a secure two-bolt faceplate that makes installing the handlebars a breeze.
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
$49.99 - $69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy
The Dune stem top loader looks incredibly clean thanks to a sunken area for the fork top bolt.This sturdy unit features a taller 31mm rise and an extra wide clamping area to hold your bars extra tight. - 6061-T6 alloy, cold forged with full cnc finish - 6mm micro head bolts - Unique offset rear for improved clamping - CNC machined underside for weight reduction
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
Ritchey's 4-Axis Adjustable Stem features a precision 3D-Net shaped forged shaft that interconnects with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. - Stainless steel bar and steerer clamp bolts - Stack Height: 40 - Weight: 219g
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
MSW 17° stems raise the bar--literally--for what riders can expect from an inexpensive stem. Available in lengths from 60-120mm for custom-fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
$34.99 - $35.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 25D Stem offers 25-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged and internally machined 2014 alloy body - CrMo faceplate bolts and patented 220 degree bar clamp design reduces weight, increases stiffness and distributes stress more evenly - Stainless steel steer tube bolts and curved clamp slot reduces weight and steer tube stress - 5Nm torque max on all hardware - Fits most road and mountain bars - Installs without the removal of levers - Angle: 25-degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 40mm - Blatte finish - 120g (90mm)
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm
Giant is a world leader in carbon and their Contact SLR Aero Integrated Handlebars are as masterfully engineered and performance-enhancing as they are beautiful. They boast an ultralight one-piece, carbon handlebar/stem combo for the power transfer to climb more easily, jump out of the pack with ease and sprint for the win. They feature Giant's OD2 carbon technology for superior cornering stiffness and steering precision and come in a complete size run for finding your perfect fit. This dream bar/stem combo has rustproof stainless-steel stem bolts and it is also compatible with clip-on aero bars should you want to go even faster.
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
Give your mountain bike a stiff upper lip with Salsa's Moto Ace S.U.L. Stem. This masterpiece boasts a forged and welded aluminum construction and Salsa's Stiff Upper Lip technology that utilizes an interlocking groove to remove torsional loads from the clamp bolts.
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets. - Stack Height: 40mm - Weight: 180g
Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork
With its tough, forged aluminum construction, 4-bolt face-plate, and 52mm-wide clamp Giant's Contact DH Stem is lightweight strength and true DH durability. It offers point-and-shoot steering precision and adjustable reach so you can rally every track.
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break
Previous page Page 2 of 2