This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
The Straggler fork is very much like the Cross-Check fork — t's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
This fork will accept 26-inch tires up to 3.8-inch wide with plenty of clearance, even using rims as wide as 82mm. Surly's 100mm spaced fat forks let you build a front wheel using standard 100mm front hubs with zero offset. This spacing opens up all sorts of options for front hubs including dynamo hubs and other hard to find goodies that generally only come in 100mm spacing. Internally-butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly steel. Available in black. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide). Getting 4" tires through 100mm spaced dropouts can be a little tricky. Be patient.
Replacement disc compatible forks for the Surly Straggler. - Tire Clearance: 50mm (w/o fender) - Weight: 2.4 lb (1.1kg) uncut - Axle-to-crown: 380mm - Offset: 44mm - Steerer: 360mm, 1-1/8" straight
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
This fork will accept 26-inch tires up to 3.8-inch with plenty of clearance, even using rims as wide as 82mm. It requires a wheel built offset to match the Pugsly frame (17.5mm). Since the hub spacing is 135mm (mountain rear) this is a useful feature, especially in remote places and extreme temperatures or conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. Internally butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide)
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in “official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
$499.95 - $499.99
Stiff yet plush, Ritchey's WCS Carbon Mountain Fork soaks up the bumps and makes those tough climbs just a bit flatter. It's as light as it is tough thanks to the one-piece carbon crown and steer tube section, not to mention full carbon dropouts. It's suspension-corrected so it fits on most modern mountain bike frames, too. Enjoy the lateral stiffness of the carbon construction when you're grinding up tough singletrack, and let the vibration damping do the work on the way down to keep you comfy all ride long.
The RockShox Recon Silver sets a new benchmark for value-based performance. Recon represents a perfect partnership between Reba’s venerable crown and lower legs and Recon’s bombproof steel upper tubes. Adopting the Reba chassis allows the design team to employ shorter upper tubes, which means the Recon Silver just went on a serious weight-loss program. And with the addition of its now-standard Motion Control damper, the re-invented Recon is the new silver standard for fun. - 15mm Maxle Lite option - 32mm chassis - Now standard with Motion Control damping featuring low speed compression adjustment - Updated graphic package to complement the entire RockShox line - 27.5-inch BOOST and 29-inch/27.5-inch+ BOOST models available - TRAVEL: 100mm (AM) / 80mm, 100mm, 120mm (OE) - WHEELS: 27.5-inch, 29-inch - WEIGHT: 1960g, Weight based on 27.5-inch model, Tapered AL steerer, 9mm QR lower leg, Solo Air - DAMPING: Motion Control - AVAILABLE SPRINGS: Solo Air - ADJUSTMENTS: External rebound, low speed compression to lock - STEERER OPTIONS: 1-1/8-inch Aluminum (AM) / 1-1/8-inch Aluminum, 1-1/8-inch Steel, Tapered (OE) - CROWN: Forged, hollow aluminum - UPPER TUBES: 32mm straight wall steel - LOWERS: Magnesium, 9mm Quick Release (AM) / 9mm Quick Release, 15x100mm, BOOST 15x110mm (OE) - OPTIONS: BOOST 110 compatible option in 27.5-inch and 29-inch/27.5-inch+ - RECOMMENDED REAR SHOCK: Monarch R - MAXIMUM ROTOR SIZE: 200mm - COLOR OPTIONS: Gloss Black (AM) / Gloss White, Gloss Black, Diffusion Black (OE) - REMOTES: OneLoc remote
The Big Fat Dummy fork is made of the same 4130 Chromoly steel as its frame counterpart and accepts tires up to 26 x 5.25. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
• High-tensile steel construction • Threadless
Our Nemesis fork is built to last and take a serious beating. This fully heat-treated chromo fork features slimmer 5mm-thick CNC machined dropouts and a shorter 25mm offset, giving you a more responsive front end, so if you're going front peg first down a handrail, or blasting a quarter pipe then this is one solid fork you can trust.
Built to go fast and high, the Patrol fork by WeThePeople uses 4130 "M2" Chromoly tubing and features CNC machined micro dropouts that perfectly match the dropouts on the Patrol frame. Rounded off with its own 7075 alloy top cap, if you're looking for a strong, dependable fork with classic styling, look no further. - Lightly tapered legs - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45deg bearing *Please Note: WTP does not recommend the use of pegs on the Patrol fork
Here it is, you asked for it, you got it! We’ve created a segmented mountain bike fork to pair with our Electric Queen. Even better, we’re offering it in painted-to-match colors for those of you who bought a Cyan splatter complete or one of the yellow/pink/black fade Queens. Now you can make your EQ over into the fully rigid bicycle of your dreams. - 4130 butted and tapered fork blades - Clearance for 27.5 x 3.0 or 29 x 2.25 tires - 15x110mm Boost spacing - E.D. coated for durability and rust prevention - 1-1/8" Straight steerer tube - Thru-Axle included - Axle to Crown Length: 485 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Material: Steel - Offset: 51 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 350 mm
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The RCT3 Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 27.5 / 27.5+ - Stanchion Diameter: 35mm - Maximum Tire Width: 81mm - 27.5 x 2.8" maximum tire size
$139.99 - $159.99
The WeThePeople Patron Fork is all about choices. The 7mm full investment cast, heat-treated hollow dropouts are what make this fork so special. The go-to choice for many of WTP's pro team, the Patron Fork might just be the last fork you ever buy. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC’d steerer, single butted - Integrated crown race, designed to work with integrated headsets with a 45° bearing - 7mm, full investment cast, 4130 Chromoly, heat-treated, for 3/8''(10mm) axle - 7075-T6 alloy top bolt, M24 thread
The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. And, the DebonAir air spring increases small bump sensitivity and mid-stroke support, making the Lyrik better at tracking terrain with greater stability in rock gardens and rougher trail. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - Three position compression adjuster (Open/Pedal/Firm) with Low Speed compression adjustment in the Open position - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29", 27.5+ - Maximum Tire Width: 81mm
The RockShox SID World Cup has one focus—winning XC performance. The chassis and internals have been optimized for 100mm of travel and the one piece carbon crown and steerer tube cut every gram available. To tame the increasing demands of today's race courses the SID now features the Charger Damper in a purpose built XC tune with a firmer lockout for intense climbs. - An updated SID chassis drops weight and adds stiffness - Features the Charger Damper with Rebound, Lockout and low-speed compression adjustment - More tuning options with dedicated 100mm Solo Air spring - Features a 1 piece carbon fiber crown-steerer - OneLoc remote compatible - Factory tuned Dig Valve – mid-stroke support - Crown Race: 40mm - Offset: 42mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Maximum Tire Width: 100 x 15mm - 62mm; 110 x 15mm - 81mm
Reba has always signified RockShox quality and performance. Even more so now, with new chassis options that allow Reba to be a frontrunner in any role, from XC to trail riding. With technologies developed on SID, Reba, and Revelation, Reba is the one-stop solution to everyone looking for the unmistakable RockShox performance in a proven package. The Solo Air spring lets you add air to your fork through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, while Fast Black coating on the upper tubes provides improved durability and decreased friction for buttery smooth operation for the duration. RockShox kindly printed Sag Gradients right on the fork's upper tubes, making perfect suspension setup easy and accurate. And, that perfect spring action is controlled by a Motion Control RL damper with adjustable low speed compression and lockout with blow-off valve, keeping you on track all day long. - Crown Race: 40mm - Offset: 42mm - Front Axle: 15mm Thru x 100mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 27.5" - Maximum Tire Width: 81mm
Finely tuned ride feel—laterally and torsionally stiff with just the right amount of give to smooth out roots and rock gardens. - One piece carbon crown and steer tube section with molded legs - Full carbon dropouts and brake mount - Suspension-corrected axle-crown height based on 100mm suspension fork - Blade/Crown/Dropout: Carbon - Steerer: Tapered carbon - Steerer Length: 300mm - Steerer Diameter: 1-1/8" - Rake: 45mm - Brake Mount: Post - Axle-Crown: 470mm - Crown Diameter: 61mm - Matte UD carbon finish - Weight: 672g