Parts

- High roundness grade 300 balls in a shop dispenser bottle - 1/4"--250/bottle - 1/8"--500/bottle - 3/16"--500/bottle - 5/16"--250/bottle - 5/32"--500/bottle - 7/32"--500/bottle

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

Replacement reservoir cap screw for Hope brakes.

RaceFace X-Type Bottom Bracket Outer Race Seal - Replacement for cracked or broken X-Type outer race seals - Sold each

- Aheadset preload adjusting bolt

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

- Aluminum straddle cable carrier for cantilever brake

Stainless steel pedal washers - Sold in pairs

Caliper Mounting Bolts for Hayes hydraulic disc brake systems.

- Hoods with (FD) are Flight-Deck compatible

• 50 feet (15.2 meters) length • 5mm diameter brake cable housing

• Multi-strand construction • Length: 25 feet • Size: 4mm

- Rubber - Color: Black

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables. - 5mm ID for use with most braking cables. - 50-count bottle

Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Replacement banjo bolt for Hayes hydraulic Brake systems.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

The Greenfield KSRF rubber foot is a rubber nub that attaches to the bottom of your kickstand to prevent tipping. Made from rubber and made in the USA. - Fits all Greenfield kickstands and most generics

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters