Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Serfas Pump Head (FP-200)
$12.99
Replacement Part – Uni Smart Pump Head - New FP-200 Replacement Head MTL Lever - Not compatible as Grey Smart Head replacement
Park Tool Emergency Tire Boot
$4.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Super Patch Kit (Carded)
$4.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Vulcanizing Patch Kit
$3.99
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Meiser Presta-Valve Dial Gauge with Pressure Relief: 30psi
$17.99
So, you've taken the leap and purchased your first snow bike. Maintaining the correct air pressure is critical to maximizing performance and pleasure on any bike ride. With the low pressures of fat bike tires, even a half-pound can make all the difference. But look at the built-in gauge on your floor pump--it barely registers anything less than 20psi! The solution is this handy gauge from Meiser. 30psi range for dialing in fat bike pressures on varied terrain. Helps to fine tune tire pressure for the ultimate in performance. Compact design fits easily into handlebar or seat packs.
Genuine Innovations Tubeless Tire Repair Kit
$8.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Century Cycles InstaPatch Glueless Patch Kit
$3.99
An inner tube patch kit should be a part of every cyclist's supplies for out on the road or trail. Even if you carry a spare tube, if you end up with another flat tire, you may need to repair a tube. Our customized kit comes with 5 peel-and-stick patches, plus a small square of sandpaper for roughing up the tube for better patch stickiness.
Century Cycles Patch Kit with Glue
$2.99
An inner tube patch kit should be a part of every cyclist's supplies for out on the road or trail. Even if you carry a spare tube, if you end up with another flat tire, you may need to repair a tube. Our patch kit comes with six patches, a small tube of quick drying patch cement, a small square of sandpaper to rough up the tube for better patch stickiness, and instructions.
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! • VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) • STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items • FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. • The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) • The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) • Glass Reinforced Nylon • Chassis weight: 30 grams Includes: • Center Plate • Multi Holder • CO2 Holder • 2 AIR STRIKE CO2 Cartridges • Hardware Popular Clincher Setups (accessory items sold separately) • Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. • 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) • Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. • Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB Starter Kit
$93.95
• Complete packaged system containing all essential items for training and Sprint race distances • Includes the key items for training • Includes essentials you need for short triathlons • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation • AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
TwoFish Twofish Bikeblock Inflator Holder
$8.99
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak Bracket (Centerline Mount)
$4.99
Mounting Kit for Mountain Morph and Turbo Morph G.
Topeak Floor Pump Parts Kit
$6.99
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak Mini Pump Bracket (Centerline Mount)
$6.99
Mounting kit for Mini Morph and Road Morph G.
Topeak Pressure-Rite
$14.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Topeak Pressure-Rite Schrader Valve Adapter
$19.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Topeak Presta Valve Extender
$6.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Presta Valve Extender XL
$9.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak SmartHead ThreadLock Upgrade Kit
$17.95
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Topeak SmartHead Upgrade Kit
$29.99
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
Topeak TubiBooster
$69.95
2 in 1 design! This unique product works like a mini air compressor that allows any floor pump to compress air into the 1000cc aluminum air tank. Then, it quickly releases a high volume of air to mount tubeless tire beads. The aluminum TubiBooster head also works as a CO2 inflator, compatible with Topeak threaded 16g/25g CO2 cartridges. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves, Push to inflate - Air Tank: One liter, Store up to 200psi / 14bar air pressure (varies with the pump capacity) - Working Pressure - 1800psi / 124bar - Compatible with Topeak threaded 16g / 25g CO2 cartridges - Material: Aluminum
Topeak TwinHead Pump Rebuild Kit
$5.99
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
Topeak Twinhead Upgrade Kit
$26.99
Upgrade any pump to the TwinHead pump head.
Serfas Combo Kit 1
$40.00
Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.
Serfas FP-200 Pump Digital Gauge
$25.00
The FP-200 digital gauge allows you to convert your Serfas floor pump to digital, or replace a worn out digital gauge. It's compatible with all FPD-200 and FP-200's, with the exception of WFP-200 and FP-200BK.
Serfas Inflator Levers
$20.00
The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?
Serfas Pump Dual-Head
$6.00
Replacement Pump Head Fits dual valve pump models: - FP-35 - FP-50 - FP-55 - FP-100 - FMP-200 - FP-303 - FP-606 - TX-2 - FP-45
Serfas Pump O-Ring
$3.00
Replacement O-ring for Serfas floor pumps
Page 1 of 3 Next page